Hull-Guard Extra Epoxy Primer provides the perfect base for subsequent fairing with Awlgrip compounds. Hull-Gard Extra Epoxy Primer is a holding primer used as a base for subsequent fairing. Offers superb adhesion to properly prepared fiberglass, steel, aluminum and wood. For use above and below the waterline. Base and converter components are sold separately.Key featuresProvides Protection prior to fairingAnti-corrosive primer that adheres to fiberglass, wood and steel substratesRecoatable after six months without sandingCan be used above and below the waterlineSpecificationsFormulation: Two-component epoxyApplication: Airless spray preferred; can be brushed or rolledNumber of Coats Recommended: Two by airless sprayDrying Time: To recoat 2 hours minimum; To full cure, 10 hoursCoverage: 185sq.ft./gallon @ 4 mils/100 microns DFTColor: WhiteThinner: T0006, Model 340811